Take your Spectre to the next level with additional manifolds. The Spectre Elite Kit Side integrates even more of your cooling loop into the case structure. It mounts using the Rear IO Plate and comes with a specific one included. The port layout of the side elite kit is specifically for standard EK GPU water-blocks from the GTX 1080 onwards, it will not align with any other GPU water-blocks. It works with GPUs in standard or vertical orientation. The CPU ports will not align directly over the CPU water-block or monoblock but there is plenty of space between the back of the Elite Kit Side and the motherboard to route fittings and tube.
The Spectre Elite Kit side manifold is designed to integrate more of the loop into the case and clean up your tube runs. It mounts onto a custom Rear IO Panel which comes with the manifold. The side manifold can be used with or without the vertical GPU mount, it is compatible both ways.
- Spectre 2.0 Elite Kit Side
- Rear IO Elite Kit Side Panel.
- Stop Fittings x2
This Manifold was designed for standard width GPUs with the full water-block width of 140mm. EKs standard water-block full width is 128mm and if you remove the ports side cover it is 124mm. There is a margin before the GPU water-block ports reach the manifolds height so it is possible for wider GPUs to fit. Nothing is impossible, but use wider GPUs at your own risk.
Port alignment for the GPUs is for EKs current standard GPU water-block port positions. We recommend using EK standard water-blocks with this manifold. Water-blocks for non standard PCB GPUs and other brands can be used but the ports may not align exactly which means using more fittings.
|Dimensions||500 × 250 × 150 mm|
Questions and answers of the customers
There are no questions yet. Be the first to ask a question about this product.