ETA: 4 weeks until shipping.
If you have any questions, feel free to ask us by using the “Questions & Answers” form below.
Introducing Spectre 2.0:
- Vertical GPU Mount now included
- 40% more fluid flow inside manifold.
- Stronger, lighter manifold design.
- 60% less manifold fasteners for a cleaner manifold.
- Cable routing tweaks for all components.
- New ventilation design on front and top panels.
- Front I/O Removed. Power Button Only for a cleaner build.
- Streamlined 8pin EPS, 4pin ATX Cable Routing with more direct route.
- Smaller more streamlined rear cable cover.
- Spectre Elite Kit add-on now available, adding one more manifolds.
- The first commercially available case with an integrated manifold, designed exclusively for liquid cooling.
- Integrated cable management channels and cable combs, just clip in your cables.
- Significant cost savings due to integration of the reservoir, pump top, pump cover, roughly half of the water-cooling loop and cable management. Vastly reduced build times.
- Modder friendly, no rivets, low component count, easy to assemble and disassemble. Easy to paint and modify aluminium components.
- Large radiator capacity, double that of the typical mid-tower case. 2x 360mm radiators 60mm thickness and thicker is possible.
- Incredible possibilities for lighting. The entire manifold glows with the addition of a single LED Strip in the integrated 30cm LED Strip position.
- Designed for maximum compatibility with a wide range of liquid cooling components.
- Supports multi GPU configurations.
- Flat packs for shipping to a small size.
- Front lighting feature.
- Maximum compatibility specifically for high end components. Enormous GPU and PSU length capabilities
Spectre is the first commercially available case with both water-cooling and full cable management integration. For over a decade Singularity Computers has been building high end custom water-cooled PCs, Spectre is the result of our experience. The goal was to create the first chassis with liquid cooling and cable management integration to increase the accessibility of liquid cooling and reduce build times. We created the first case with an integrated Reservoir, Pump Top, Pump Cover, half of the cooling loop and cable management channels. This means that you do not have to purchase these components or install them which reduces costs and particularly build time. There is no need to spend hours trying to perfect your cable management, just clip your cables into the integrated cable combs within minutes. Fill and drain ports are also integrated to simplify filling and draining your loop. At Singularity Computers integration does not mean reducing options and compatibility. We used a design process involving our experience and statistics, to create the perfect layout for the loop and cable routing for the case, for maximum compatibility with high end components.
All parts are carved from a solid block of material on a CNC Machine. This manufacturing process is the most precise and the highest quality possible for a PC Case. The materials are thick and strong, everything is over engineered. The aluminium is 6061 and anodized or powder coated, and the acrylic is clear cast. The fasteners are all stainless steel. The posts at the rear of the case are created from stainless steel on a CNC Lathe. We use gaskets instead of o-rings to increase durability and lifespan. Spectre after over 2 years has a warranty record with only a single part replacement required up to date.
Specifications & Compatibility:
- Motherboard Form Factor: XL-ATX (Max: 320mm x 285mm 7 Expansion Slots ( 8th slot fits but component cannot be mounted). EATX, ATX, MATX, Mini-DTX, Mini ITX.
- Case Form Factor: Mid Tower.
- Case Dimensions: L 533mm x W 313mm x H 575mm
- Package Dimensions: L 650mm x W 650mm x H 150mm
- Case Weight: 16kg
- Manifold Weight: 8kg.
- Case Weight In Package: 18KG.
- Expansion Slots: x7.
- Drive Capacity: 2.5” x3.
- Radiator Top: 360mm. (Up to 60mm thick with 1 set of 25mm fans)
- Radiator Front: 360mm. (Up to 60mm thick with 1 set of 25mm fans).
- Maximum GPU Length: 500mm.
- Maximum GPU Height: 150mm mounted on motherboard. (Unlimited height if vertically mounted).
- Maximum PSU Length: 280mm.
- Maximum CPU Cooler Height: 150mm
- Front Panel I/O: No Front I/O. Vandal Switch Power Button 19mm.
- Ports: Ports: x6 G1/4” BSPP. 1 Fill, 1 Drain.
- Pump compatibility: Any D5 Pump. (Pump Not Included).
- Cables: Integrated Cable Management is for 4mm sleeved cables.
- Cable Lengths: There is space for excess cable length inside of the PSU shroud. For exact lengths See
additional informationfor more details
Weight 17.5 kg Dimensions 530 × 510 × 295 mm Case Color Black Cable lengths 24pin: 700mm
Pci-e: 680mm & 650mm (same for SLI)
Eps: 800mm & 830mm(if mobo requires dual eps)
Sata power: 260mm , 310mm & 360mm
- Fittings: Click Herefor more details
Spectre Bitspower Fittings Package
Spectre Bitspower Fittings Package – Essentials Spectre Bitspower Fittings Package – Elite PART QTY PART QTY Hardline Compression fittings – 16mm OD 9 Hardline Compression fittings – 16mm OD 11 90 degree Single Rotary – 16mm OD 3 90 degree Single Rotary – 16mm OD 9 90 degree Dual Rotary – 16mm OD 1 90 degree Dual Rotary – 16mm OD 4 10mm Extension Fitting – 16mm OD 1 10mm Extension Fitting – 16mm OD 1 15mm Extension Fitting – 16mm OD 1 15mm Extension Fitting – 16mm OD 1 25mm Extension Fitting – 16mm OD 1 25mm Extension Fitting – 16mm OD 3 40mm Extension Fitting – 16mm OD 1 30mm Extension Fitting – 16mm OD 2 Quick Disconnect Male – 16mm OD 1 40mm Extension Fitting – 16mm OD 1 Quick Disconnect Female – 16mm OD 1 Quick Disconnect Male – 16mm OD 1 Mini D-Plug – 16mm OD 1 Quick Disconnect Female – 16mm OD 1 Mini D-Plug – 16mm OD 1
Spectre Bitspower Fittings Package Remarks:
– Essentials Package designed around 2x EK PE 360mm Radiators with a Single Vertically Mounted GPU.
– Elite Package designed around 2x EK PE 360mm Radiators with Dual Vertically Mounted GPUs, Front Elite Kit and Side Elite Kit.
- Vertical GPU Mount: x1 included with ribbon cable. (Second can be purchased separately for dual GPUs).
- Aquearo 6 LT Mount: Included on Bottom PSU Shroud for mounting inside of the PSU Shroud.
- Lighting: Integrated 30cm LED Strip position under top panel. (Install during case assembly).
- Materials: 6061 Aluminium, Cast Acrylic, 304 Stainless Steel
- Manufacturing Process: CNC Router, CNC Mill, CNC Lathe.
- Assembly: Assembled By Hand.
- M3 Hex Key.
- M4 Hex Key.
- M6 Hex Key.
ManualDownload Spectre 2.0 Assembly Manual
Spectre 2.0 Warranty
IMPORTANT: Spectre 2.0 Warranty
Thank you for your purchase, we look forward to seeing what you do with our creation. Spectre 2.0 introduced a number of new technologies and ideas. With this product we have pioneered liquid cooling integration using a production CNC machined manifold. Anything new requires education and there is an adjustment period.
Spectre 2.0 has a 2 year limited warranty.
Welcome to Singularity Computers and your new Spectre 2.0! We look forward to seeing what you create.
1: The Integrated Liquid Cooling System is pressure tested at the factory, so there is no need to adjust the fasteners on the manifold. Take care not to over tighten any fasteners on the acrylic. As soon as you feel any significant feedback or tension go no more than 1/4th of a turn past it. On the metal parts you can tighten normally. We are not responsible for damage caused by over-tightening the fasteners.
2: Any thread stripping, cross threading or thread damage of any kind will not be covered under our warranty. All threads are pre-tested. We use stainless steel fasteners which are extremely tough.
3: All acrylic is carefully checked for scratches, marks or particles as the manifold is assembled. We are not responsible for mistreatment of the acrylic. Only clean with a microfiber cloth and use nothing except distilled or deionized water for cleaning, or Novus Plastic Cleaner. Damage caused by cleaning agents (particularly alcohols or solvents) is not covered under warranty.
4: Acrylic Surface Guarantee: Marks on acrylic which cannot be wiped away with a microfiber cloth will only be covered under warranty under the following conditions: That they did not occur after the item was shipped from the Singularity Computers Factory or Retailer. If there are more than 10 marks which are beyond 5mm in length and visible when facing perpendicular to the surface. Evidence of this must be photographed in detail and photographs must be taken perpendicular to the surface. Marks must be easily visible in photographs, subtle marks will not be covered.
5: For the latest coolant recommendations please visit http://bit.ly/sc-important-info. We are not responsible for staining of the acrylic, but it has never been an issue with our products. Most staining will be easy to remove by flushing out the loop with distilled water for 24hrs or using Mayhems Blitz. If you are concerned about staining then we suggest Mayhems Non-Stain Dyes.
6: Any damage which occurs after the item leaves the Singularity Computers Factory or our Retailers is not covered under warranty. We are not responsible for shipping damage or mishandling.
|Dimensions||700 × 670 × 210 mm|
|Spectre Bitspower Fittings Package – Essentials||
Hardline Compression fittings – 16mm OD x9
|Spectre Bitspower Fittings Package – Elite||
Hardline Compression fittings – 16mm OD x11
|Spectre Fittings Package - Remarks||
– Essentials Package designed around 2x EK PE 360mm Radiators with a Single Vertically Mounted GPU.
Questions and answers of the customers
Q I have the 1.0 case, and the header cable is 9 inches too short to thread in the bottom rail to r... answer nowAsked by profezzorx on November 24, 2019 10:40 pmAnswered by the admin
On V1 they were designed to connect to the bottom of the motherboard not the middle. They should always reach the bottom of the board and every board at the time we looked at had USB 3.0 headers there. Are you saying it doesnt even reach the bottom of the board?
Q Would it be possible to fit a Hardware Labs Nemesis GTS in push/pull for both the front and top r... answer nowAsked by fernando vargas on November 19, 2019 12:33 amAnswered by the admin
Yes you have 85mm in Spectre plus a small margin, for the radiators and fans. Nemesis GTS are 30mm and two sets of fans are 50mm.
Q Do you offer a pump cover that fits the aquacomputer D5 NEXT pump? It has a different contour due... answer nowAsked by Michael on October 9, 2019 12:07 amAnswered by the admin
Our pump cover is 3 piece, you can remove the back cover and also the sleeve section and only use the retention ring, so it will work with any D5 pump including the AC NEXT
Q Does the case come with pass through fittings? If not, are Bitspower G1/4" passthrough fittings s... answer nowAsked by Emilio on October 3, 2019 12:56 amAnswered by the admin
Passthrough fittings are not needed because the ports are in the back wall of the case already and have threads. Half of the loop is integrated, the reservoir, pump top, pump cover and cable management.
ETA: 5 weeks until shipping.Introducing Wraith:
From the people who brought you the first ever PC Chassis liquid cooling integration, we now bring you Wraith. In development for the past 2 years since the release of Spectre, Wraith has all of the features of Spectre but in a smaller Mini-ITX Mini-DTX form factor. Now you can fit the most extreme components on the market into a very small space and have the ultimate in liquid cooling. Integrated cooling components include the Reservoir, D5 Pump Top, D5 Pump Cover, Fill Port, Drain Port and over half of the cooling loop. Integration and compatibility do not have to work against each other when you have more than a decade of experience building extreme liquid cooled systems. From a combination of statistics and experience we have created a port layout which will not inhibit compatibility or your creativity. Wraith has a cable cover so that stock cables can be used in a clean configuration, custom cables are not necessary. Despite its compact size Wraith can fit full sized GPUs, 2x 240mm radiators, 13x 2.5” drives and even a 3.5” drive and more. The case is designed to be modified and every component can be completely disassembled. As always we look forward to seeing your creativity with our design.